









Jaquar Wall Mounted Single Lever Basin Mixer
- Manufacturer: Jaquar
- Model Range: Fusion / Alive / Opal Prime / Kubix Prime — Wall Mounted Single Lever Basin Mixer (Exposed Part Kit)
- Build Material: Genuine virgin brass construction
- Finish: Mirror chrome
- Design: Concealed wall-mount architecture with ergonomic single-lever control
- Variants: 4 design options — Fusion, Alive, Opal Prime, Kubix Prime (see comparison table)
- Please note: Exposed part kit only — requires a Jaquar ALD-233N or ALD-235N concealed body, sold separately
Jaquar Wall Mounted Single Lever Basin Mixer brings a clean, minimalist look to your basin area by hiding the bulky plumbing work inside the wall. Crafted for modern aesthetics and long-lasting functionality, it's available across four design variants — Fusion, Alive, Opal Prime, and Kubix Prime — so you can match the look to your bathroom's styling.
Each kit is systematically engineered out of virgin brass to prevent corrosion and heavy metal leaching, ensuring absolute water safety. Covered by a flawless multi-layered chrome plating, they offer exceptional resistance against hard water stains and physical abrasions. The smooth single-lever handle provides effortless, single-handed control over water flow and temperature.
All four variants supply the same components — operating lever, cartridge sleeve, wall flange, nipple and spout — and all four are compatible with the same concealed bodies, so the choice between them is a matter of styling and flow specification rather than installation.
Key Features
- Genuine Virgin Brass Build: Certified brass alloy construction to maximize structural strength and rule out cracks or fatigue under high water pressure
- Ergonomic Single-Lever Design: Seamless, smooth-moving handle for precise, single-handed control of temperature and water velocity
- Multi-Layered Mirror Chrome Finish: 10.0-micron Nickel and 0.3-micron Chromium layer for a perpetual, reflective shine
- 500+ Hours Salt Spray Validated: Lab-tested in saline environments to guarantee the finish won't peel, flake, or corrode over decades of use
- Advanced Eco-Friendly Aerator: Certified, anti-clogging aerator that introduces air into the stream for a soft, splash-free, foamy flow
- Concealed Wall-Mount Architecture: Saves counter space by shifting plumbing infrastructure entirely into the wall cavity
- Four Design Variants: One installation standard, four visual options — all sharing the same concealed body compatibility
Variant Comparison — Fusion vs. Alive vs. Opal Prime vs. Kubix Prime
Technical Data Comparison
| Parameter | Fusion | Alive | Opal Prime | Kubix Prime |
|---|---|---|---|---|
| Product Code | FUS-CHR-29233NK | ALI-CHR-85233NK | OPP-CHR-15233NKPM | KUP-CHR-35233NKPM |
| Flow Rate (@ 3 Bar) | 15.00 LPM | 14.76 LPM | 14.86 LPM | 13.30 LPM |
| Aerator Size & Cert. | 20X1 (WRAS, ACS Approved) | 20X1 (WRAS, ACS Approved) | 24X1 (WRAS, ACS Approved) | 20 × 1 (WRAS, ACS Approved) |
| Core Brass Material | Brass Rod, Sheets & Pipes | Brass Ingots, Rod & Sheets | Brass Ingots, Rod & Sheets | Brass |
| Chrome Plating Thickness | Nickel: 10.0 µm / Chrome: 0.3 µm | Nickel: 10.0 µm / Chrome: 0.3 µm | Nickel: 10.0 µm / Chrome: 0.3 µm | Nickel: 10.0 µm / Chrome: 0.3 µm |
| Water Pressure Range | 0.5 – 5.0 Bar | 0.5 – 5.0 Bar | 0.5 – 5.0 Bar | 0.5 – 5.0 Bar |
| Eco Flow Regulator Suffix | G, GA, GB, GD, GE compatible | G, GA, GB, GD, GE compatible | G, GA, GB, GD, GE compatible | G, GA, GB, GD, GE compatible |
| Concealed Body Required | ALD-233N or ALD-235N | ALD-233N or ALD-235N | ALD-233N or ALD-235N | ALD-233N or ALD-235N |
| Colour | Standard Chrome only | Standard Chrome only | Standard Chrome only | Standard Chrome only |
Application & Suitability
Where This Mixer Fits Best
- Modern Residential Bathrooms: Master toilets, powder rooms, and luxury guest bathrooms with tabletop or vanity washbasins
- High-End Commercial Spaces: Premium office suites, luxury hotels, boutique lounges, and fine-dining restaurant restrooms
- Table Top Basins Especially: A wall-mounted mixer clears the raised bowl entirely, which a deck-mounted tap struggles to do
- In-Wall Body Requirement: Must be installed over a pre-fitted concealed body; connects seamlessly to high-pressure plumbing frameworks with standard inlets
Professional Recommendations & Installation Guidelines
Installation Best Practices
- Concealed Body Prerequisite: The internal plumbing wall must contain a Jaquar ALD-233N or ALD-235N concealed body — this exposed kit cannot be mounted onto other brands or generic in-wall valves. This applies equally to all four variants
- Set the Height Before Tiling: A wall-mounted mixer must clear your basin rim, and on a table top basin that rim is high. Confirm the spout height against the actual basin before the concealed body is fixed — it cannot be moved afterwards
- Water Pressure Optimization: Maintain an operating pipeline pressure between 1.0 and 3.0 Bar for the best flow; use a pressure booster pump in multi-story buildings with low gravity pressure
- Pre-Installation Line Flushing: Flush the internal pipelines to clear construction debris, sand, or plumbing tape before fixing the cartridge sleeve and aerator
- Correct Maintenance Practices: Clean only with a soft microfiber cloth and mild soap solution — avoid abrasive pads, hydrochloric acid, or harsh chemical cleaners
1) Does this package include the complete tap set required for a fresh bathroom installation?
No. This product is an Exposed Part Kit only. It includes the visible external components — the operating lever, cartridge sleeve, wall flange, nipple, and spout. You must have a pre-installed in-wall concealed body model Jaquar ALD-233N or ALD-235N, purchased separately, before tiling your walls. This applies to all four variants.
2) What is the functional difference between the Fusion, Alive, Opal Prime, and Kubix Prime variants?
The primary differences lie in aesthetic profile shape, flow rate, and aerator specification. Fusion offers a slightly higher flow rate of 15.00 LPM with distinct geometric styling. Alive delivers 14.76 LPM with curvy minimalist styling. Opal Prime outputs 14.86 LPM and features an upgraded 24X1 aerator. Kubix Prime carries the sharp, squared geometry of the Kubix range, which suits bathrooms fitted with square-bowl sanitaryware. All four are offered in standard chrome finish only, and all four use the same concealed body — so switching between them changes only the look, never the plumbing.
3) My home water supply has low pressure. Will these single-lever mixers work fine?
Yes. These kits are engineered to work at a minimum operating pressure of 0.5 Bar. For a genuinely satisfying flow, 1.0 to 3.0 Bar is recommended. If your bathroom sits directly beneath the building's overhead tank, pressure may feel lower — a pressure booster pump solves this instantly.
4) Can I decrease the water consumption of these taps to meet green building certifications?
Yes. All four variants are compatible with external Jaquar flow regulators. Ordering with a specific suffix lets you throttle consumption: G (2.5 LPM), GA (6.0 LPM), GB (8.0 LPM), GD (3.8 LPM), GE (1.3 LPM) — measured at a standard 4.0 Bar line.
5) How do I clean and remove hard water scaling from the tap without ruining the finish?
Wipe the tap with a soft cloth dipped in a 50:50 mixture of water and white vinegar, let it sit briefly, rinse with clean water, and dry completely. Never use hydrochloric acid, tile cleaners, bleach, or wire mesh scrubbers — these will damage the protective 0.3-micron Chromium shield despite its 500-hour salt spray rating.
- Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
You may also like






